MCH6102 / mch6202 no.6480-1/5 applications ? relay drivers, lamp drivers, motor drivers, flash. features ? adoption of mbit processes. ? high current capacitance. ? low collector-to-emitter saturation voltage. ? high-speed switching. ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). ? high allowable power dissipation. specifications ( ) : MCH6102 absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--30)40 v collector-to-emitter voltage v ceo (--)30 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)1.5 a collector current (pulse) i cp (--)3 a base current i b (--)300 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 1.0 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)30v, i e =0a (--)0.1 m a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)0.1 m a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)300ma (450)500 mhz output capacitance cob v cb =(--)10v, f=1mhz (9)8 pf marking: MCH6102: ab, mch6202: cb continued on next page. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : en6480b d2005ea ms im tb-00001962 / d1004 ts im tb-00000347 / 83100ts (koto) ta-2843 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. MCH6102 / mch6202 pnp / npn epitaxial planar silicon transistors dc / dc converter applications http://semicon.sanyo.com/en/network
MCH6102 / mch6202 no.6480-2/5 continued from preceding page. ratings parameter symbol conditions min typ max unit collector-to-emitter saturation voltage v ce (sat) i c =(--)750ma, i b =(--)15ma (--250)150 (--375)225 mv base-to-emitter saturation voltage v be (sat) i c =(--)750ma, i b =(--)15ma (--)0.85 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 m a, i e =0a (--30)40 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)30 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 m a, i c =0a (--)5 v turn-on time t on see specified test circuit. (37)35 ns storage time t stg see specified test circuit. (115)205 ns fall time t f see specified test circuit. (26)32 ns package dimensions switching time test circuit unit : mm 7022-007 0.25 0.25 0.07 2.1 1.6 2.0 0.65 0.3 0.85 0.15 1 123 654 32 5 46 top view bottom view 1 : collector 2 : collector 3 : base 4 : emitter 5 : collector 6 : collector sanyo : mcph6 v r r l =16 w v cc =12v v be = --5v 20i b1 = --20i b2 = i c =750ma for pnp, the polarity is reversed. + + 50 w input output r b 100 m f 470 m f pw=20 m s i b1 i b2 d.c. 1% --2.0 --1.6 --1.2 --0.8 --0.4 0 0 --200 --400 --600 --800 --1000 i c -- v ce --4ma --2ma --6ma --8ma --10ma --15ma --20ma --30ma --40ma --50ma i b =0ma MCH6102 it01872 --1.4 --1.6 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 i c -- v be it01874 ta=75 c 25 c --25 c MCH6102 v ce = --2v 1.4 1.6 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.2 0.4 0.6 0.8 1.0 ta=75 c 25 c --25 c mch6202 v ce =2v 0.8 1.2 1.6 2.0 0.4 0 0 200 400 600 800 1000 i c -- v ce 2ma 4ma 8ma 6ma 10ma 15ma 20ma 30ma 50ma 40ma i b =0ma it01873 i c -- v be it01875 mch6202 collector current, i c -- a base-to-emitter voltage, v be -- v collector-to-emitter voltage, v ce -- mv collector current, i c -- a collector-to-emitter voltage, v ce -- mv collector current, i c -- a collector current, i c -- a base-to-emitter voltage, v be -- v
MCH6102 / mch6202 no.6480-3/5 1000 100 2 3 5 7 2 3 5 7 10 v ce (sat) -- i c it01881 v be (sat) -- i c 10000 1000 100 7 5 3 2 7 5 3 2 it01883 1000 100 2 3 5 7 2 3 5 7 10 v ce (sat) -- i c it01879 --1000 --100 2 3 5 7 2 3 5 7 --10 v ce (sat) -- i c it01878 --1000 --100 2 3 5 7 2 3 5 7 --10 v ce (sat) -- i c it01880 v be (sat) -- i c --10000 --1000 --100 7 5 3 2 7 5 3 2 it01882 1000 100 7 5 3 2 7 5 3 2 10 --0.01 --0.1 3 257 3 257 3 2 --1.0 --0.01 --0.1 3 257 3 257 3 2 --1.0 --0.01 --0.1 3 257 3 257 3 2 --1.0 --0.01 --0.1 3 257 3 257 3 2 --1.0 h fe -- i c it01876 1000 100 7 5 3 2 7 5 3 2 10 0.01 3 25 0.1 73 23 2 57 1.0 0.01 3 25 0.1 73 23 2 57 1.0 0.01 3 25 0.1 73 23 2 57 1.0 0.01 3 25 0.1 73 23 2 57 1.0 h fe -- i c it01877 dc current gain, h fe collector current, i c -- a dc current gain, h fe collector current, i c -- a ta=75 c 25 c --25 c MCH6102 v ce = --2v ta=75 c 25 c --25 c mch6202 v ce =2v ta=75 c 25 c --25 c mch6202 i c / i b =20 ta=75 c 25 c --25 c MCH6102 i c / i b =20 ta=75 c 25 c --25 c MCH6102 i c / i b =50 ta=75 c 25 c --25 c mch6202 i c / i b =50 25 c 75 c mch6202 i c / i b =50 ta= --25 c ta= --25 c 25 c 75 c MCH6102 i c / i b =50 collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv
MCH6102 / mch6202 no.6480-4/5 a s o i cp =3a i c =1.5a 100ms dc operation 10ms 1ms 500 m s 100 m s 0 1.4 1.0 0.8 0.6 0.4 0.2 1.2 20 060 40 80 100 140 120 160 p c -- ta MCH6102 / mch6202 it01889 1.0 0.1 7 5 5 3 3 2 2 7 5 3 2 0.01 1.0 0.1 25 37 10 25 37 100 25 37 it01888 f t -- i c 7 3 100 2 5 7 3 2 5 1000 it01887 mch6202 v ce =10v f t -- i c 100 1000 7 7 2 5 3 3 2 5 --0.01 257 3257 3 --0.1 --1.0 0.01 0.1 257 3257 3 1.0 it01886 MCH6102 v ce = --10v cob -- v cb 7 5 3 2 7 5 3 2 5 3 2 10 100 --1.0 23 57 23 5 23 5 7 --0.1 --10 it01884 MCH6102 f=1mhz 7 5 3 2 7 5 3 2 10 100 5 3 2 0.1 1.0 23 57 23 57 10 23 5 it01885 mch6202 f=1mhz cob -- v cb collector-to-emitter voltage, v ce -- v collector current, i c -- a ambient temperature, ta -- c collector dissipation, p c -- w MCH6102 / mch6202 ta=25 c single pulse for pnp, minus sign is omitted. mounted on a ceramic board (600mm 2 5 0.8mm) mounted on a ceramic board (600mm 2 5 0.8mm) collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a gain-bandwidth product, f t -- mhz collector current, i c -- a gain-bandwidth product, f t -- mhz
MCH6102 / mch6202 no.6480-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of december, 2005. specifications and information herein are subject to change without notice. ps
|
